Flame scanner’s applications
Everything About Flame Scanner Flame monitoring system is used to detect formation of flame inside combustion chamber and to prevent fuel injection inside it in case no flame is formed. If flame dies, safety system of flame scanner acts within one second to close fuel valve. This way, fuel accumulation inside combustion chamber and probable […]
S.E.T Flame Scanners Installed in South Pars Gas-Condensate field
SET Flame Scanners And Their Efficiency Flame scanners produced by Sepanta Electronic Tabarestan (SET) have proven to be more effective than reputable brands such as BFI, Durag, and LAMTEK from Germany, ABB, Honeywell, and Fireye from the USA, Hamworthy from the UK, and PILLARD from France, so have been installed in The South Pars Refineries. […]
AGD01 Flame Sensor, Installation and Set-up Guidance
AGD01 Series, Installation And Application Guide The Flame sensor AGD01 series monitors and analyses the flame features via the pulse signal of the connected sensor unit. The easy-to-read LCD display continually shows information on the defined setting and operational status. The flame intensity is presented at a current output 0.4…20mA for further analysis. There are […]
Flame Detection System Corresponding Table
Flame Detection System, Corresponding Table Flame Detection System Corresponding table is a guidance to choose the best SET product. If you are currently utilizing various versions of Flame scanners from different brands worldwide and are considering a switch to our products, we have prepared a comprehensive replacement guide table. This guide will assist you in […]
About SAx-100
Compact Flame Scanner SAx100 The SAx100 Flame Scanner is a compact safety device consisting of an optical flame sensor and digital processor. SAx-100 can monitor flame of different fuels and combustion process. Fig 1) SAx-100 flame Scanner Fig 2)SAx-100 blocks SAx100 Wiring Harting Connector Wiring SAx100 Housing Ex-housing (X1) with Gland OE-converter-housing (X3) Ex-housing OE-converter (X4) […]
Flame Monitoring System SUT-100,Instalation and Set up Guidance
SUT-100 Flame Scanner A flame scanner detects the existence of a flame inside the combustion chamber, and aims at preventing fuel injection into the combustion chamber in the absence of flame formation. If the flame goes out, the system protection will operate in one second and issue the fuel valve closing command. This action prevents […]
Compact Flame Scanner SAx-200,Datasheet & Installation Guidance
About Compact Flame Scanner SAx-200 Compact Flame Scanner SAx200, along with other models of flame scanners, is designed to detect the existence of flame inside the combustion chamber, and aims at preventing fuel injection into the combustion chamber in the absence of flame formation (Fig 1). If the flame goes out, the system protection will operate […]
Best Flame Scanner For Gas Turbine
The Best Replacement For Old Flame Scanners In MITSUBISHI Turbines Mitsubishi turbines are one of the most common gas turbine in different industries all around the world.Our Flame Scanners in S.E.T, which are currently installed in several power plants and refineries in the country, are the best solution to replace the old Flame scanners of […]
